Radio Mount | 2024-2025 Tacoma - Fits Grab Handle

Fitment Notes

This radio mount fits the grab handle on the center console of 2024-2025 Toyota Tacomas.

Description

If you've been looking for how to install a CB radio, ham radio, GMRS radio, scanner, or other two-way radio in your Toyota Tacoma, this is a great option.

The mount clamps to the grab handle on the passenger side of your Tacoma's console. It can be placed anywhere along the rubber pad that covers the handle.

The Mounting Plate is 14 gauge steel, powder-coated black. The Mount Base is a 3D printed part made of ABS.

Thanks for stopping by and please don’t hesitate to reach out with any questions!

Getting Started

Watch the video below for a quick walkthrough of what you need to know to get started with your new radio mount.

To use the radio mount:

1. Gather the (2) coupling nuts, (2) of the 1/4-20 x 7/8 flat head bolts, and the radio mount piece that goes on the outside part of the grab handle (the larger of the two plastic parts).
2. Slide the coupling nuts into the hexagonal holes and screw the flat head screws into them through the recessed holes on the opposite side of the part. Tighten the screws using the included hex wrench, and then back them off about 1/8 turn so the coupling nuts have some slack.
3. Use the 1/4” hardware ((2) button head cap screws, (2) square nuts, (2) washers) to secure the Mounting Plate to the Mount Base at your desired height.
4. Use the #10 hardware ((2) screws, (2) lock nuts, (4) washers) to bolt your OEM radio bracket that came with your radio to the Mounting Plate.
5. While holding this assembly in place in the desired position on the grab bar, slide the other plastic part over the coupling nuts and use the other (2) 1/4-20 x 7/8 flat head screws to snug the two plastic parts together.
6. Install your radio on the OEM radio bracket.

Installation is easy and no hardware is required to attach the Mount Base to the console.